Default value is OFF. If you want to use the
VOX feature, VOX level should be set at a
different level.
•
1 = High audio input level will trigger the Tx
•
2 = Medium sensitivity
•
3 = Low audio input level will trigger the Tx
Microphone Gain
The sensitivity of the microphone can be
All manuals and user guides at all-guides.com
Toggle Voice Prompt in User Mode
Short press the SB1 Button while turning ON
the radio to enable/disable the Voice Prompt in
User Mode. (Default is set to ON).
Note:
This setting is set to OFF by default and
must be enabled using the CPS.
Power Up - Tone Mode
To enable/disable power up tone mode, press