Hands-Free Use/Vox; With Compatible Vox Accessories; Hands Free Without Accessories (Ivox) - Motorola XT225 User Manual

Non display model
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1

HANDS-FREE USE/VOX

Motorola Solutions XT Series radios can
operate hands-free (VOX) when used with
compatible VOX accessories.

With Compatible VOX Accessories

The default factory setting for VOX sensitivity
level is OFF (Level 0). Before using VOX, use
the Computer Programming Software (CPS) to
change the VOX sensitivity level from
1 (lowest) to 9 (highest).Then, perform the
following steps:
22
English
VOX
Accessory
Accessory Port/
Connector
1.
Turn the radio OFF.
2.
Open accessory cover.
3.
Insert the audio accessory's plug firmly into
accessory port.
4.
Turn radio ON. The LED Indicator will be solid
red for 2 seconds.
5.
Lower radio volume BEFORE placing
accessory near ear.
6.
To transmit, speak into accessory microphone
and to receive, stop talking.
Note:
To order accessories, contact your Motorola
Solutions point of purchase.

Hands Free without Accessories (iVOX)

Enable / Disable iVOX via CPS.
There is a short delay between the time when you
start talking and when the radio transmits.

Advertisement

Table of Contents
loading

Table of Contents