Charging A High Capacity Battery - Motorola RDU4100+ User Manual

Charging a High Capacity Battery

Removable
Piece
To convert the charger from the default setup to
accommodate the High capacity or Ultra High
capacity battery:
1. Squeeze both tabs on each side of the
removable bracket in the drop-in charger tray
and lift the bracket from the charger tray.
2. Rotate the removable bracket 180 degrees and
replace it by fitting it in the charger slot until it
snaps. The label on the removable bracket
should show 'High Capacity Battery' facing
front of the charger.
23
English
3.
Removable
Piece
Note:
Turn around
horizontal
180 degree
Repeat same procedure to return to the
charging a Standard Battery position. Label on
the removable bracket should show 'Standard
Battery' facing front.
Make sure the bracket is assembled
correctly for both standalone battery and
battery (with radio)