Table of Contents
Advertisement
Connect the garden hose to the connector on the back of the machine. Before connecting, run
water through the garden hose {not supplied) to flush cut any foreign matter.
Note: If your water source is a well, the garden hose length can only be 9m as
maximum.
Insert the spray lance into the gun by pushing firmly and simultaneously twisting a 1/4 of a
turn counter clockwise until locked into place.
ATTENTION! WARNING
If the lance is not securely locked into place, it could be ejected under high pressure during
operation, possibly causing injury or damage.
Turn incoming water on and fully open valve to insure maximum water flow to the machine.
HIGH-PRESSURE WASHER
Starting
15
EN
USER'S MANUAL
Advertisement
Table of Contents
