Replacing the volume-buttons board
WARNING: Before working inside your tablet, read the safety information that shipped with your
tablet and follow the steps in
follow the instructions in
Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1.
Align the screw holes on the volume-buttons board with the screw holes on the back-cover
assembly.
2.
Replace the screws that secure the volume-buttons board to the back-cover assembly.
3.
Slide the volume-buttons board cable into the connector on the volume-buttons board and press
down the latch to secure the cable.
Post-requisites
Replace the battery.
34
Before working inside your
After working inside your
tablet. After working inside your tablet,
tablet. For more safety best practices, see the
22