Removing the display assembly
WARNING: Before working inside your tablet, read the safety information that shipped with your
tablet and follow the steps in
follow the instructions in
Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
Remove the battery.
Procedure
1.
Peel off the display cable from the system board.
2.
Using the pull tab, disconnect the display cable from the system board.
3.
Peel off the display cable from the back-cover assembly.
4.
Lift the display assembly, along with its cable, off the back-cover assembly.
1.
display assembly
3.
pull tab
42
Before working inside your
After working inside your
tablet. After working inside your tablet,
tablet. For more safety best practices, see the
2.
back-cover assembly
4.
display cable
27