Removing the back camera
WARNING: Before working inside your tablet, read the safety information that shipped with your
tablet and follow the steps in
follow the instructions in
Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
Remove the battery.
Procedure
1.
Remove the screw that secures the back camera to the back-cover assembly.
2.
Disconnect the camera cable from the system board.
3.
Lift the back camera, along with its cable, off the back-cover assembly.
1.
camera cable
3.
back camera
22
Before working inside your
After working inside your
tablet. After working inside your tablet,
tablet. For more safety best practices, see the
2.
screw
4.
back-cover assembly
11