Replacing the headset port
WARNING: Before working inside your tablet, read the safety information that shipped with your
tablet and follow the steps in
follow the instructions in
Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1.
Slide the headset-port cable into its connector on the system board and press down the latch to
secure the cable.
2.
Align the screw holes on the headset-port bracket and the headset port with the screw holes on the
back-cover assembly.
3.
Replace the screws that secure the headset-port bracket and the headset port to the back-cover
assembly.
Post-requisites
Replace the battery.
28
Before working inside your
After working inside your
tablet. After working inside your tablet,
tablet. For more safety best practices, see the
16