WARNING:
Before working inside your tablet, read the safety information that shipped with your tablet and follow the steps in
Before working inside your
more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the headset-port cable into its connector on the system board and press down the latch to secure the cable.
2
Align the screw holes on the headset-port bracket and the headset port with the screw holes on the back-cover assembly.
3
Replace the screws that secure the headset-port bracket and the headset port to the back-cover assembly.
Post-requisites
Replace the battery.
tablet. After working inside your tablet, follow the instructions in
Replacing the headset port
After working inside your
tablet. For
Replacing the headset port
18
27