Pitney Bowes DP50S Hardware Manual page 10

1. Guide to the Printer
Replace the dustproof filter when the "Replace IntTrans Unit Soon." message appears on the
display. Replace it with the transfer unti together.
1
6. Power Connector
Connect the power cable to the printer. Insert the other end into an electrical outlet.
7. Handle
Hold this handle when you pull out the controller board.
8. Optional Gigabit Ethernet Board Slot
By removing this cover and installing the optional Gigabit Ethernet board, you can connect an
Ethernet cable to the printer.
• A hard disk is pre-installed in the HDD standard model.
8