Paper Weight And Capacity - Pitney Bowes DP50S Hardware Manual

5. Paper and Other Media
• Tracing paper can curl easily due to humidity. If the paper has curled considerably, flatten it first, and then
load it.
• Some types of paper have a clear vertical or horizontal orientation depending on the direction of the
fibers. If you feed this type of paper in the opposite orientation, paper jams can occur. When loading
tracing paper, load the paper so that it is fed in the direction of the fibers.
• Print quality may not be guaranteed for custom size paper that is wider than 297 mm (11.69 inches) in
width or longer than 433 mm (17.05 inches) in length.
• When using paper whose sizes are not automatically selected, select the paper size manually using the
control panel. See "Loading Paper".
• "Registering Names to Paper Types"
• "Loading Paper"
5

Paper Weight and Capacity

Tray
Tray 1
Tray 2
1000-sheet paper feed unit
2000-sheet paper feed unit
Bypass Tray
• Do not load the paper so that the top of the stack exceeds the under limit mark inside the tray.
58
Supported paper weight
60 to 256 g/m² (16 to 68 lb.)
60 to 256 g/m² (16 to 68 lb.)
60 to 256 g/m² (16 to 68 lb.)
60 to 256 g/m² (16 to 68 lb.)
52 to 256 g/m² (14 to 68 lb.)
Supported capacity (Plain
paper)
550 sheets (80 g/m², 20 lb.)
550 sheets (80 g/m², 20 lb.)
550 sheets x 2 (80 g/m², 20 lb.)
1000 sheets x 2 (80 g/m², 20
lb.)
100 sheets (80 g/m², 20 lb.)