D-Link dnr-312l User Manual page 46

Section 3 - Configuration Interface
This section allows you to configure your e-mail notification settings. When an an event occurs, such as motion detection or
hard disk failure, you will receive an e-mail notification.
Sender email Input the sender's e-mail address.
address:
Server Enter the SMTP (Simple Mail Transfer Protocol) server IP address.
address:
User Name: Enter the User Name for your SMTP account.
Password: Enter the Password for your SMTP account.
Port: Enter the Port used by your SMTP server. Check the box by This server
requires a secure connection if your e-mail server uses TLS (Transport
Layer Security) or SSL (Secure Sockets Layer) protocol.
Test: Click the Test button and the system will send a test e-mail to verify
whether or not your settings are correct.
Click Save to save your settings.
Adding Contacts:
Step 1: Enter the name of a new contact.
Step 2: Enter the e-mail address of this new contact.
Step 3: Click Add.
D-Link DNR-312L User Manual
Event
E-Mail Settings
42