D-Link dnr-312l User Manual page 43

Section 3 - Configuration Interface
From the Audio tab, you may configure the two-way audio settings for your camera.
Camera Name:
Displays the Name of the selected camera.
Audio Format: Select either G711, G726 or AAC.
Enable
Check the box to turn the microphone on, or uncheck the box to turn
Microphone:
the microphone off.
Audio in Gain
Select an Audio in gain level from the drop-down menu. (Amount of
Level:
gain applied to incoming audio to increase its volume.)
Enable
Check the box to enable audio out for the camera (if supported).
Speaker:
Audio Out
Select a volume level from the drop-down menu to adjust the volume
Volume Level:
of outgoing audio (speakers).
Click Save to save your settings.
The Image tab has the following camera settings:
Camera Name: Displays the Name of the selected camera.
Brightness: Make a selection from the drop-down menu to adjust the brightness.
Contrast: Make a selection from the drop-down menu to adjust the contrast.
Saturation: Make a selection from the drop-down menu to adjust the saturation.
Sharpness: Make a selection from the drop-down menu to adjust the sharpness.
Click Save to save your settings.
D-Link DNR-312L User Manual 39