Recording Schedule - D-Link dnr-312l User Manual

Section 3 - Configuration Interface
The NVR has a highly-configurable scheduling system, allowing for continuous recording, or for recording during specified time
periods. Each camera can be set to record independently. You can also configure event recording based on specific triggers.
The NVR can be configured to overwrite the oldest data automatically when Hard Disk space runs out, allowing for uninterrupted
recording. You may specify the number of days the recording should be kept (within the limits of the Hard Disk capacity).
Recording Settings
Enable Schedule Check the box to enable recording according to a schedule.
Record:
Enable Select this option to automatically create disk space when the disk is full.
Automatic This will overwrite the earliest recorded video with the most recently
Overwrite: recorded video, one day at a time.
Enable Audio Check the box to enable recording audio from your camera (if
Record: supported).
Set Recording Schedule
Day: Schedule the cameras to turn the recorder on and off at the specified
time every day according to your preference.
Week: Schedule the cameras for each day of the week.
Insert: Insert new schedules.
Delete: Delete the selected schedule.
Configure: Modify the schedule and recording setting.
Copy: Copy the current Day Schedule to other channel(s), or copy the current
Week Schedule to other day(s) of a week or to other channel(s).
D-Link DNR-312L User Manual
Schedule

Recording Schedule

40