Setup Wizard - Mac Users - D-Link dnr-312l User Manual

Mydlink network video recorder with hdmi out

Hide thumbs Also See for dnr-312l:

Table of Contents

Section 2 - Installation

The following instructions explain how to launch the Setup Wizard using

your Mac computer.

Step 1:

Insert the DNR-312L installation CD into the CD-ROM drive, and go to the

CD drive directory. Double-click the Mac Utility folder to enter.

Step 2:

Double-click the DNR-312L Setup Wizard file to launch the wizard, which

will guide you through the complete installation process.

Note: If you do not have the CD, go to http://www.mydlink.com/support.

Click the Storage tab and select your product to download the Setup Wizard.

Step 3:

From the Welcome screen, click Start and follow the instructions to set up

your NVR. (Detailed instructions begin on the next page.)

If you just need to add cameras to your previously configured DNR-312L,

click the Skip button. Refer to

about adding cameras.

Note: The computer used to access the NVR must be on the same subnet as the

NVR. If your network is using a DHCP server, the NVR will automatically be in

the same subnet.

D-Link DNR-312L User Manual

Setup Wizard - Mac Users

"Camera Search" on page 52

for instructions

Table of Contents