Section 2 - Installation
The following instructions explain how to set up the NVR with the Setup Wizard, using your Windows computer. If you are
using a Mac, skip to
"Setup Wizard - Mac Users" on page
Note: Make sure you install all cameras on the network before initiating the DNR-312L setup.
Step 1:
Insert the DNR-312L installation CD into the CD-ROM drive. If the CD Autorun
function does not automatically start on your computer, click Start > Run.
In the run box, type D:\autorun.exe (where D: represents the drive letter of
your CD-ROM drive) and click OK.
Note: If you do not have the CD, go to http://www.mydlink.com/support.
Click the Storage tab and select your product to download the Setup Wizard.
Step 2:
From the Welcome screen, click the Start button to start the Setup Wizard,
and follow the instructions to set up your NVR. Proceed to
Hard Drive and Connect" on page
If you just need to add cameras to your previously configured DNR-312L,
click the Skip button. Refer to
about adding cameras.
Note: The computer used to access the NVR web-based configuration interface must be on the same subnet as the NVR. If your
network is using a DHCP server, the NVR will automatically be in the same subnet.
D-Link DNR-312L User Manual
Setup Wizard - Windows Users
12.
"Camera Search" on page 52
11.
"Step 1 - Install a
for instructions
10