Silvercrest SFS 150 B3 Operating Instructions Manual page 11

GB
8
♦ Open the appliance lid by pressing the lid releases
♦ Place a bag opening on the sealing wire
in place and does not slip, place the end of the bag below the suction con-
nectors . For this you can lift them slightly. The bag needs to extend up to
the marking "Seal", which is marked on the appliance.
NOTICE
► The bag opening must lie smoothly on the sealing wire
sealing does not function properly.
♦ Close the appliance lid. When doing so, ensure that both corners engage.
If necessary, press the corners down lightly until the device lid is engaged
properly. If the device lid is not properly engaged, the sealing process
cannot be started!
♦ Press the sealing button
♦ Hold the sealing button
extinguishes.
. To ensure that the bag is fi xed
with both hands. The indication lamp
pressed down until the indication lamp
to the top.
. Otherwise, the
illuminates.
SFS 150 B3