Settings Tabs - Brother PJ-722 Online User's Manual

Changing the Printer Settings

Settings Tabs

Basic Tab
1 Auto Power On
Specifies how the printer responds when connected to an AC or DC power outlet or when the battery is
installed.
Available settings: [Disable], [Enable], [Enable (No Main Button)]
2 Auto Power Off (AC/DC)
Specifies the amount of time that passes before the printer turns off automatically when connected to an
AC or DC power outlet.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/15/20/25/30/40/50/60/90/120 minutes
3 Auto Power Off (Li-ion)
Specifies the amount of time that passes before the printer turns off automatically when powered by the
rechargeable Li-ion battery.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/15/20/25/30/40/50/60/90/120 minutes
4 Command Mode
Specifies the printer's command format.
Available settings: [Raster], [ESC/P Legacy], [ESC/P Brother], [P-touch Template]
5 Print Density
Specifies the printing density.
Available settings: 0-10
6 Print Speed
Specifies the printing speed in inches or millimeters per second.
Available settings: [1.1 ips / 27 mm/s], [1.6 ips / 41 mm/s], [1.9 ips / 48 mm/s], [2.5 ips / 65 mm/s]
7 Skip Perforation
Leaves a one-inch (25.4 mm) margin at the top and bottom of the paper.
Use it when printing on perforated roll paper so that the printer does not print on the perforation.
1
2
3
4
5
6
7
8
9
3
3
3
67