Removing The Rechargeable Li-Ion Battery; Charging The Rechargeable Li-Ion Battery - Brother PJ-722 Online User's Manual

Setting Up the Printer

Removing the Rechargeable Li-ion Battery

a
Move the battery latches to the unlock position, and then remove the battery.
1 Battery latches
b
Insert the battery cavity mounting block into the battery cavity until it locks into place.
c
Move battery latch 1 to the lock position.

Charging the Rechargeable Li-ion Battery

Note
• Charge the battery immediately after purchase using the following procedure.
• Up to three hours are needed to fully charge the rechargeable Li-ion battery. When fully charged, the
battery will print about 600 pages.
a
Turn the printer off and install the battery.
b
Use the AC adapter and AC power cord to connect the printer to an AC power outlet (see Connecting to
an AC Power Outlet (Optional) on page 14), or use the car adapter to connect the printer to a DC power
outlet (see Connecting to a DC Power Outlet (Optional) on page 15).
1 POWER indicator
2 STATUS indicator
c
When the battery is fully charged, the STATUS indicator turns off. Disconnect the AC adapter or car
adapter from the DC connector.
1
2
1
1
1
1
12