Setting Printer Driver Options; Settings That Can Be Changed Using The Windows ® Printer Driver (Examples) - Brother PJ-722 Online User's Manual

Using the Printer

Setting Printer Driver Options

You can configure various settings such as paper size and number of copies, in the printer driver screen.
To use the functions indicated with an asterisk (*), install the printer driver that will be available in February
2016 and thereafter. The newest version can be downloaded from the Brother Solutions Center website:
support.brother.com.
Note
You can also use the Printer Setting Tool (see Changing the Printer Settings on page 45) to configure
advanced settings.
Settings That Can Be Changed Using the Windows
Basic Tab
1 Paper Type
Specifies the type of paper that is loaded.
Available settings: [Cut Sheet], [Roll], [Perforated Roll]
2 2-ply Mode
Specifies the setting for using 2-ply paper.
Available settings: [Enable], [Disable]
3 Roll Printer Case
Specifies the setting for using the optional roll printer case. If [PA-RC-001] or [PA-RC-001 (Without Anti
Curl)] is selected, you can adjust the feed value or amount of paper retraction for the roll printer case.
Available settings: [Printer Default], [None], [PA-RC-001], [PA-RC-001 (Without Anti Curl)]
®
Printer Driver (Examples)
1
2
3
4
5
6
7
8
9
* This screen image may be different from
your screen.
2
2
2
2
32