Printer Settings Tab - Brother PJ-722 Online User's Manual

Changing the Printer Settings
8 Dash Line Print
Prints dash lines between pages, useful when printing on roll paper. Set [Form Feed Mode] to [Fixed
Page], and then select [Enable]. Note that dash lines are printed on the paper; they are not punched into
the paper.
Available settings: [Enable], [Disable]
9 Stencil Paper Mode
Available settings: [ON], [OFF]

Printer Settings Tab

1 Auto Power On
Specifies how the printer responds when connected to an AC or DC power outlet or when the battery is
installed.
Available settings: [Disable], [Enable], [Enable (No Main Button)]
2 Auto Power Off (AC/DC)
Specifies the amount of time that passes before the printer turns off automatically when connected to an
AC or DC power outlet.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/15/20/25/30/40/50/60/90/120 minutes
3 Auto Power Off (Li-ion)
Specifies the amount of time that passes before the printer turns off automatically when powered by the
battery.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/15/20/25/30/40/50/60/90/120 minutes
4 Paper Sensor Threshold
Specifies the threshold of the paper detection sensor.
Available settings: 0-255
5 Print Data after Printing
Allows to erase print data after it is printed.
Available settings: [Erase All Print Data], [Keep Print Data]
1
2
3
4
5
6
7
8
9
3
3
84