Brother PJ-722 Online User's Manual page 62

Changing the Printer Settings
Communication Settings (for PJ
1 Network Settings on Power On
Specifies the conditions for connecting via Wi-Fi when the printer is turned on. Select [On by Default], [Off
by Default] or [Keep Current State].
2 Selected Interface
Select [Wireless LAN] or [Wireless Direct].
3 Enable Wireless Direct when Wireless LAN is turned on
Allows to enable the Infrastructure and Wireless Direct modes at the same time.
This check box appears when you select [Wireless LAN] for [Selected Interface].
773)
-
1
2
3
3
3
54