ENABLE DTR / DSR
USE BG COUNT KEY
EXAMPLE:
PORT 1
BE SURE DISPLAY SHOWS CORRECT
PORT NUMBER
(TO CHANGE, SEE ITEM "D")
PROGRAM PORTS
USE BAG STOP KEY
ENABLED
DTR / DSR
E. Cycle the BAG STOP Key until the
Display shows:
F. Cycle the BAG COUNT Key to enable or
disable DTR / DSR.
G. Exit using one of the following:
Press BAG STOP Key to select the next
communications parameter
OR
Press MOTOR ON / OFF Key to select
the next programming parameter
OR
Turn the Keyswitch to horizontal, then
back to vertical to exit the programming
mode.
7.6
SELECT RTS / CTS ENABLE
A. Turn Keyswitch to vertical position, hold
Batch Key on Control down, and switch
the Sorter Power Switch to ON.
B. Cycle MOTOR ON / OFF Key until
Display shows:
Programming
rts / cts
51