Introduction; Ram Error; Key Sequence - De La Rue MACH 6 User Manual

MOTOR RUN
SYMBOL
CHECK DRAWER AND
COVER INTERLOCKS
RAM / ROM ERROR
--CALL SERVICE
USE CORRECT

KEY SEQUENCE

display messages

INTRODUCTION

This feature allows the Control to alert the
operator to an error condition. A Motor Run
Symbol (located in the upper left corner of the
Display), will appear while the Sorter Motor is
running.
Should the Sorter stop for any reason, observe
the Display. If the reason was a Sorter error,
one of the following error messages will be
displayed. If the reason was an operator error
(lifting the Front Cover, removing a Coin Drawer,
etc.), the Motor will stop and the Display will
show:
Locate and eliminate the problem and continue
operation.
11 messages are available:

1. RAM ERROR

A problem has occurred in the electronics of
the Sorter. Stop operation. Press the CLEAR
Key to clear the Display. If the problem
persists, disconnect Sorter from power and
contact your Authorized Service
Representative for assistance.
2. KEY SEQUENCE
Keys where not pressed in an acceptable
sequence. Press the "CLEAR" Key to clear
the Display and use the proper key
sequence.
Operation
25