Decimal Pt / Comma; Selection / Position - De La Rue MACH 6 User Manual

DECIMAL PT SPECS
--USE BAG STP / CNT
DISPLAY WILL USE
DECIMAL POINT
decimal point / comma
2. DECIMAL POINT / COMMA SELECTION
AND DISPLAY LOCATION
A. Turn Keyswitch to vertical position, hold
Batch Key on Control down, and switch
the Sorter Power Switch to ON.
B. Cycle MOTOR ON / OFF Key until
Display shows:
C. To select Decimal Point / Comma
1. Press BAG STOP Key. Display will show:
DISPLAY WILL USE
OR
COMMA
Repeated depressions of the BAG STOP
Key will select between the Displays.
When the Display you require is shown,
either:
Press the BAG COUNT Key to select the
Decimal Point / Comma position (See "D"
below).
OR
Press the MOTOR ON / OFF Key to
select the next parameter.
OR
Turn the Keyswitch to horizontal, then
back to vertical to exit the programming
mode.
D. To select Decimal Point / Comma
position:
Programming
33