Table of Contents
Advertisement
Operation
the control
ALL TOTALS CLEAR
14
CLEAR
Clears the value shown on the
Display. The exception to this rule is
the "GRAND-- CLEAR -- ACCEPT"
sequence, in which case the
GRAND is cleared after the
ACCEPT Key is pressed. If a Printer
is connected, the output is sent to
the Printer. If a Serial Port is
configured for data output, it will be
sent to that Port.
Note: The Sorter incorporates a power--up
reset (clear) feature to clear all totals stored
in batch and grand memory, as well as all
bag count totals.
To ensure the Control is clear (Display at
".00"), hold the CLEAR Key on the Control
down, and while holding, move the main
Power Switch at the rear of the Sorter to on.
The Control will cycle through a "self--check"
sequence and then display:
For two (2) seconds, then return to display
batch total.
Hide quick links:
Advertisement
Table of Contents
