Changing The Bagstop - De La Rue MACH 6 User Manual

Station No.
(Showing Coin Value)
Station #1
Station #2
Station #3
Station #4
Station #5
Station #6
Station #7
Station #8

CHANGING THE BAGSTOP

QUANTITY
Three Bagstop quantities are operator
selectable for each coin station. Each Station's
coin value (unit count if non--valued coin) and
three selectable bagstop amounts are
programmed at the time of manufacture. The
values can be altered for your particular
application. Refer to the Programming section
later in this guide for this procedure. Totals and
memory are retained by a service--replaceable,
non--rechargeable lithium battery in the event of
a power loss.
The Control permanent memory contains the
following coin values and three pre--selected
bagstop settings per Sorting Station.
The coin values and bagstop amounts shown in
the chart below may be altered for your specific
application. Refer to the Programming section
later in this Guide for this procedure. These new
coin values are held in memory which is
retained by the battery during power outages.
Quantity
"A"
10,000
5,000
4,000
4,000
1,000
2,000
-- -- -- --
-- -- -- --
CHART "A"
PREPROGRAMMED QUANTITIES
bagstop quantities
Quantity Quantity
"B" "C"
5,000 1,000
2,500 500
2,000 400
2,000 400
500 100
1,000 200
-- -- -- -- -- -- -- --
-- -- -- -- -- -- -- --
Operation
23