Select Dtr / Dsr Enable - De La Rue MACH 6 User Manual

Programming
dtr / dsr
PROGRAM PORTS
USE BAG STOP KEY
SELECT PORT NO.,
USE BG COUNT KEY
EXAMPLE: PORT #1
PORT 1; 9600, N, 7, 1
DTE
50
G. Exit using one of the following:
Press BAG STOP Key to select the next
communications parameter
OR
Press MOTOR ON / OFF Key to select
the next programming parameter
OR
Turn the Keyswitch to horizontal, then
back to vertical to exit the programming
mode.
7.5

SELECT DTR / DSR ENABLE

(NOT AVAILABLE ON PORT #3 or
PORT #4)
A. Turn Keyswitch to vertical position, hold
Batch Key on Control down, and switch
the Sorter Power Switch to ON.
B. Cycle MOTOR ON / OFF Key until
Display shows:
C. Press BAG STOP Key. The Display will
show:
D. Cycle the BAG COUNT Key until the
Display shows the port you wish to
change.
THE DTR / DCR THAT YOU SELECT WILL
APPLY ONLY TO THE PORT YOU HAVE
SELECTED IN ITEM "D".