Zero Configuration Setup - D-Link DCS-5020L Quick Install Manual

Zero Configuration Setup

If you have a D-Link Cloud Router with an Internet connection, you can take
advantage of Zero Configuration. This feature automatically configures your
camera's settings for you and adds it to your mydlink account automatically. If you
do not have a D-Link Cloud router, refer to the next page to install and configure
your camera.
1
Connect the Ethernet cable and power adapter to the
camera.
2
Connect the other end of the Ethernet cable to your
D-Link Cloud Router and connect the camera's power
adapter to a power outlet.
From any computer, open a web browser,
3
go to http://www.mydlink.com and log into
your account.
Click on the device name when the notice
appears to add the camera to your account.
If you wish to connect your camera to your router wirelessly, you can simply disconnect
the Ethernet cable and move the camera to its intended location after you have added
the camera to your account (step 3).
DCS-5020L
4