Installing Riser Cards And Add-On Cards In Uio Models - Supero SC216A-R1200UB User Manual

Secure the tail
of the riser
card bracket
to the fan tray
with one screw
Figure 5-9: Installing the UIO Riser Card Bracket

Installing Riser Cards and Add-on Cards in UIO Models

Installing the Riser Card - UIO Chassis Models
1. Remove the chassis cover.
2. Remove the riser bracket.
3. Install the riser card onto the riser bracket. Note that there are different cards
for the right and left side of the bracket.
4. Gently slide the riser card bracket with the riser card installed into the chassis
and simultaneously plug the riser card into the slot on the motherboard.
5. Locate the three screws on your riser card bracket and secure it to the chas-
sis as illustrated above.
Chapter 5: Chassis Setup and Maintenance
5-9
Secure the head
of the riser
card bracket to
the rear of the
chassis with two
screws