Installing Client Software For Usb Printing; Installation For Usb Printing By Plug And Play - Toshiba E-STUDIO 281C Printing Manual

2 Installing Client Software for Windows

Installing Client Software for USB Printing

This section describes how to set up the printer drivers when this equipment is connected with
USB cable.
To set up the printer drivers for USB printing, you must install the printer drivers by Plug and Play
functions instead of installing the client software using the installer in the Client Utilities CD-
ROM.
When this equipment is connected to a USB port of Windows Me, Windows 2000, Windows XP,
Windows Vista or Windows Server 2003 computers, the Plug and Play Wizard automatically
starts. You can install a printer driver using this method but other client software cannot be
installed.
The Font Manager is also available to install and manage the TrueType fonts on your computer.
To install the Font Manager, you must install it from the Client Utilities CD-ROM separately.
USB printing is not supported in Windows NT 4.0.

Installation for USB Printing by Plug and Play

The procedure to install the printer driver for USB printing by Plug and Play differs depending on
the version of Windows used.
P.54 "Windows XP/Vista/Server 2003"
P.57 "Windows 2000"
P.60 "Windows Me"
Windows XP/Vista/Server 2003
Installing the printer driver for USB printing by Plug and Play
The following describes an installation on Windows XP. The procedure is the same when Win-
dows Vista or Windows Server 2003 is used.
You must log into Windows as a user who has the "Administrators" or "Power Users" privilege.
You must log into Windows as a user who has the "Administrators" privilege when using Win-
dows XP/Vista/Server 2003.
1
Power on this equipment and your computer.
2
Connect the USB cable to this equipment and your computer.
The Found New Hardware Wizard dialog box appears.
54

Installing Client Software for USB Printing