Toshiba E-STUDIO 281C Printing Manual page 181

3
Set the following options.
Finisher
Not Installed — Select this if a finisher is not installed.
Single-Position Stapler — Select this when the Hanging Finisher is installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is
installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle
Stitch Finisher and Hole Punch unit are installed.
Drawers
Not Installed — Select this when no optional drawer is installed.
Drawer 3 — Select this when the drawer 3 is installed.
Drawer 3 and 4 — Select this when the drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
LCF is not available for some countries or regions.
The finisher options such as stapling and hole punching can be selected even if you
select "Not Installed" for the Finisher option. If you select the finisher options for print-
ing but the finisher is not installed, finisher settings will be ignored and perform print-
ing correctly.
4
Click [Apply Changes] and close the window.
Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x 179