Toshiba E-STUDIO 281C Printing Manual page 246

5 Printing from Windows
- Center Double — Select this to fold and staple the printed document double in the cen-
ter. When you select this, the pages will be printed on the sheets according to the print
option settings, and then simply fold and staple double in the center of the sheets.
"Center Double" can be used to create a booklet from a document that has been already cre-
ated as a paginated booklet. To create a paginated booklet from a normal document, per-
form the booklet printing in the 2-Sided Printing option.
The selectable options vary depending on the paper size.
"Center Double" can be selected only when the Saddle Stitch Finisher is installed.
2-Sided printing cannot be set when the following paper size in selected at the "Print
Paper Size" drop down menu in the Basic Tab.
- A5
- A6
- A3-Wide
- Statement
- 12 x 18"
- A4 Tab
- Letter Tab
5) Hole Punch
This sets whether a print job is printed with hole punches.
- Center Top — Select this to create holes along the top edge and print.
- Middle Left — Select this to create holes along the left side and print.
Hole punching can be selected only when a hole punch unit is installed.
244 Setting Up Print Options