Toshiba E-STUDIO 281C Printing Manual page 164

3 Installing Client Software for Macintosh
In the "Name" field, the name that is entered in the Address field is automatically dis-
played.
When you enter the IP address or DNS name of this equipment in the "Address" field,
the correct PPD file is automatically selected in the "Print Using" drop down menu. If
the correct PPD is not automatically selected, select "TOSHIBA" in the "Print Using"
drop down menu and select the PPD file displayed in the list.
4
Click [Add].
The Installable Options window appears.
5
Set the following options.
Finisher
Not Installed — Select this if a finisher is not installed.
Single-Position Stapler — Select this when the Hanging Finisher is installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is
installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle
Stitch Finisher and Hole Punch unit are installed.
Drawers
Not Installed — Select this when no optional drawer is installed.
Drawer 3 — Select this when the drawer 3 is installed.
Drawer 3 and 4 — Select this when the drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
LCF is not available for some countries or regions.
The finisher options such as stapling and hole punching can be selected even if you
select "Not Installed" for the Finisher option. If you select the finisher options for print-
ing but the finisher is not installed, finisher settings will be ignored and perform print-
ing correctly.
6
Click [Continue].
The printer is added to the Printer List.
162 Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x