Toshiba E-STUDIO 281C Printing Manual page 322

6 Printing from Macintosh
- Middle Bottom (Portrait)/Middle Left (Landscape) — Select this to staple double in the
bottom for the portrait document, or in the left for the landscape document.
- Saddle Stitch (Portrait)/Saddle Stitch (Landscape) — Select this to staple double in
the center for a booklet to be printed. Select this only when booklet printing is performed.
This option cannot be selected if a finisher is not installed.
"Saddle Stitch (Portrait)/Saddle Stitch (Landscape)" can be selected only when the Sad-
dle Stitch Finisher is installed.
Depending on the type of finisher installed and destination settings, stapling and hole
punching may not be performed. Depending on the equipment settings, the paper may
be delivered to a tray that cannot carry out stapling or hole punching when "Auto" is
selected as the "Destination" option.
— DC (Department Code)
In the DC menu, you can specify your department code, if this equipment is enabled the depart-
ment codes. Before specifying the department code, you must check the Department Code
option in the Printing Modes menu. Then specify the department code in this menu.
1
2
3
4
5
320 Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x