Printing On A Tab Paper - Toshiba E-STUDIO 281C Printing Manual

Printing an overlay image on a print job
1
Display the Effect tab and select the overlay image name to be used
in the "Overlay Image" drop down menu.
2
Set any other print options you require and click [OK].
3
Click [OK] or [Print] to send the print job.
The print job is printed with the overlay image.

Printing on a Tab Paper

This equipment supports tab printing, which can print in the tab extension of the tab paper.
This equipment can print only on the Letter sized or A4 sized tab paper.
If mis-printing occurs while multiple tab pages are printed continuously, toner may adhere to
the reverse side of a paper. To avoid this, it is recommended to print a tab paper as a sepa-
rated job for each page so that this equipment performs cleaning before printing the next tab
paper.
When printing tab paper, the tab paper may be caught in the exit in the inner tray because
the roller failed to deliver the tab extension to the exit. In that case, remove the tab paper
before printing the next job.
Printing a document on tab paper
1
Create a Letter sized or A4 sized document and place the text or
object that should appear on the tab extension as described below.
More than 0.2" or 5mm
Document
Must exactly
fit the tab extension
When you create a document for tab printing, place the text or object that should appear
on the tab extension on the right side of the document. You must place the text in the
height exactly to fit to the tab extension. Also the right margin, a margin between the text
and right edge of the document, must have more than 0.2 inch or 5 mm space because
the equipment cannot print in the space.
Width of Tab Extension = Image Shift Margin
Printed Image
Printing with Extended Print Functionality 287