Toshiba E-STUDIO 281C Printing Manual page 284

5 Printing from Windows
5
Select the page order for booklet in the "In page of the order"
option.
From Left to Right — Select this to print the pages from left to right.
From Right to Left — Select this to print the pages from right to left.
6
If you want to add a margin space between facing pages, enter a
width in the "Center" field, and if you want to add a margin on the
outside edge, enter a width in the "Outer" field.
You can change the unit of the margin at the "Units" drop down menu.
The center margin can be set from 0.000 inch to 0.500 inches in units of 0.01 inch
when the unit is inch, and from 0.000 mm to 12.700 mm in units of 0.10 mm when the
unit is mm.
The printed images will be reduced according to the margin setting.
7
If you want to double staple the center, check the "Staple Down the
Center" box.
"Staple Down the Center" is available only when the Saddle Stitch Finisher is installed
and configured on the Configuration tab.
8
Set any other print options you require and click [OK].
9
Click [OK] or [Print] to send the print job.
The print job is printed as a booklet.
If a Saddle Stitch Finisher is not installed, the output will not be folded. But you can cre-
ate a booklet by folding along the center by yourself.
282 Printing with Extended Print Functionality