Programming The Relay Mapping (On Optional 16-Relay Board); Enabling The Relay Signal Silence (On Optional 16-Relay Board) - Notifier CFP-600-E Installation And Operating Manual

PROGRAMMING THE RELAY MAPPING (on optional 16-relay board)

RELAY MAPPING | A00
CONFIGURATION | G00
| D00
| E00
RELAY MAPPING | A00
Z.01 | G00
| D00
| E00
RELAY MAPPING | A00
Z. 01 | G00
0 02 | D00
| E00
»
NOTE: by entering the relay number equals to 0, it means that no relay will be mapped.
In addition, it is possible to map the same control relay to more zones, obtaining the OR function of the zone.
IMPORTANT NOTE: “CONTROL PANEL ZONES”
•
The first 12 zones are the line initiating circuits (DETECTOR ZONES)
•
Zones 13 to 20 are LOGIC ZONES which can be used to program the actions to carry
out in case of Alarm or Prealarm condition.

ENABLING THE RELAY SIGNAL SILENCE (on optional 16-relay board)

RELAY PROGR.
CONFIGURATION | G00
R. __
R. 02
SILENCEABLE
YES
Modify Exit |E00
CFP-600-Prog-3.VP
Doc. M-131.1-CFP600-ENG
| A00
| D00
| E00
| A00
| G00
| D00
| E00
|A08
|G08
|D00
Installation and Operating Manual
ENTER
CURSOR
ENTER
CURSOR
ENTER
ENTER
CURSOR
ENTER .
ENTER
Rev. B.1
Page 13
NOTIFIER ITALIA