Maintenance Schedule (600 Ho E-Tec) - BRP Ski-doo Tundra Series Operator's Manual

MAINTENANCE SCHEDULE (600 HO E-TEC)

Maintenance is very important for keeping your vehicle in safe operating condition.
Proper maintenance is the owner's responsibility. The vehicle should be serviced
as per the maintenance schedule.
The maintenance schedule does not exempt the pre-ride inspection.
Failure to properly maintain the vehicle according to the maintenance
schedule can make it unsafe to operate.
Adjust drive chain
Inspect engine rubber mounts
Inspect exhaust system and check for leaks
Adjust engine stopper
Visually inspect and clean drive pulley
Tighten drive pulley retaining screw to specified torque
Clean driven pulley
Adjust and align track
Inspect brake hose, pads and disk
Inspect steering mechanism
Inspect front suspension
Inspect rear suspension (including stopper straps and slider shoes)
Lubricate rear suspension. Lubricate whenever the vehicle is used in wet conditions
(rain, puddles)
Inspect fuel pump strainer and replace if necessary
Replace brake fluid
Inspect throttle cable
WARNING
EVERY 1 500 KM (1,000 MI)
EVERY 3 000 KM (2,000 MI) OR 1 YEAR
(WHICHEVER COMES FIRST)
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
_______________
91