BRP Ski-doo Tundra Series Operator's Manual page 135

DRIVE SYSTEM (cont'd)
Track profile height
Track tension
Track alignment
BRAKE SYSTEM
Brake system type
Brake fluid
SUSPENSION
Front suspension
Front shock
Front suspension max. travel
Rear suspension
Center shock
Rear shock
Rear suspension max. travel
ELECTRICAL SYSTEM
Lightning system output
Headlights bulb HI/LOW beam
Taillight bulb
Spark plug
Fuse
WEIGHT AND DIMENSIONS
Dry weight
Vehicle overall length
Vehicle overall width
Ski stance
Ski width
(1) Measure gap between slider shoe and bottom inside track when exerting a
downward pull to the track.
NOTICE
(2) Do not attempt to adjust gap on this spark plug.
MODEL
Deflection
Force (1)
Type
Gap
40 mm to 45 mm (1-1/2 in to 1-9/16 in)
Equal distance between edges of track guides
Hydraulic, REV-XP™ brake type
0.7 mm - 0.8 mm (.028 in - .031 in)
______________
600 HO E-TEC
57.2 mm (2.25 in)
7.3 kg (16 lb)
and slider shoes
DOT 4
LTS
Motion control
150 mm (6 in)
SC-5U
HPG™
HPG™
35.6 cm (14 in)
12 V/360 W
55 V/1100 W
2 x 60/55 watts (H-4)
2.6W/139mW LED
NGK PZFR6F (2)
(Not adjustable)
FUSES
Refer to section
225 kg (495 lb)
332.9 cm (131.1 in)
100.2 cm (39.4 in)
81.3 cm (32 in)
165 mm (6.5 in)
SPECIFICATIONS
133