GRAUPNER Race copter alpha 250 Q Manual page 6

6
Ð Protect the Race Copter from dust, dirt, moisture and other
foreign parts. Do not expose this equipment to vibration
and excessive heat or cold. The remote control operation
may be carried out only in "normal" ambient temperatures,
in a range from -10 ° C to +55 ° C.
Ð Use all of your Hott components only with the latest Soft-
ware version
Ð If any questions arise that can not be ascertained with the
help of the operating manual, please contact us (contact
information, see page 3) or another expert.
WaRNING
!
Ð Pay attention, even while programming, that the connect-
ed motors do not start suddenly. Injury risk by the turning
propellers! Program always the motors stop switch on the
transmitter. (See transmitter manual)
Ð Avoid shock and pressure. Check the Race Copter regu-
larly for damages to the housings and cables. Damaged
or wet electronic components, even if re-dried, should no
longer be used!
Ð Never touch the turning propellers, this can cause serious
injury.
Ð The propellers must be mounted securely, thrown parts
can cause serious injury.
Ð Keep long hair, loose clothing such as scarves, loose shirts
or similar well away from the danger zone of the revolving
propeller, they may be withdrawn by the propeller, flying
debris can cause serious injury.
Ð Follow the safety notes of the required additional compo-
nents.
Notes:
Ð After you perceive your model, check if all components are
inside the package and eventual damages.
Ð Remove the battery from the model when transporting or
when not in use.
Ð During transport protect the model and the transmitter
from damages.
care:
P
Clean the Copter only with the suitable cleaners. Good is a
spirit-free cloth. Never use chemical cleaners, solvents, pet-
rol, alcohol or similar.
16520_Copter_jh_V1