Table of Contents
Related Manuals for GRAUPNER Race copter alpha 250 Q
Summary of Contents for GRAUPNER Race copter alpha 250 Q
- Page 1 Manual Race copter alpha 250 Q No. 16520.hott...
-
Page 2: Table Of Contents
Index Index .................. 2 Introduction ................ 3 Service centre ..............3 Intended use ..............4 Package content ..............4 Symbols explication ............5 Safety notes ............... 5 Preparation for start ............7 Receiver’s binding ............... 7 Transmitter settings ............7 Gyro initializing in the receiver .......... -
Page 3: Introduction
Race Copter and first of all to control safely your model. If you experience any trouble during operation, take the instruc- tions to help or ask your dealer or Graupner Service Centre. Due to technical changes, the information may be changed in this manual without prior notice. -
Page 4: Intended Use
Read through this entire manual before you attempt to pro- gram or use the RACE COPTER. Graupner / SJ constantly works on the development of all products; we reserve the right to change the item, its technol- ogy and equipment. -
Page 5: Symbols Explication
/ or modification of the product is not permitted. Ð They may only be used our recommended components and accessories. Use only genuine matching Graupner connectors of the same design and the same material. Ð Make sure that all connections are secure. Do not pull on the cables when you unplug the connector. - Page 6 Ð Protect the Race Copter from dust, dirt, moisture and other foreign parts. Do not expose this equipment to vibration and excessive heat or cold. The remote control operation may be carried out only in “normal” ambient temperatures, in a range from -10 ° C to +55 ° C. Ð...
-
Page 7: Preparation For Start
To start fling you need the following items: Ð Transmitter (MX-12 / MZ-12 or higher) Ð Battery pack Graupner 9717.3.D35 or similar Battery installation Fix the battery in its compartment using some hook-and-loop tape. Place the battery so that the copter’s centre of gravity is in the middle of the frame. -
Page 8: Gyro Initializing In The Receiver
The receiver is optimally set for Race Copter Alpha 250Q. If you want to change however some settings, follows the in- structions content in the receiver manual. (Download at www.graupner.de) Select the flight mode as previously mentioned by the trans- mitter. This procedure is described in the receiver manual in the section “Transmitter settings“. -
Page 9: Suggested Accessories
innovation & technologie Suggested accessories So you can make your copter an FpV Race copter! Ð 9717.3.D35 LiPo battery V-MAXX 50C 3/1500 11,1V XT60 Ð 48331 Pilot HD Cam Ð 16520.40 ALPHA 250 MINI CAMERA Ð 48326 5,8 GHz 25mW AV transmitter Ð... -
Page 10: Technical Data
Ð Arms 10x3 cm (thickness 3 mm) Ð Weight:129 g conformity declaration S3055 Ultra control 12a Speed controller Graupner/SJ declares that the product is conform to EU norms. EMV 2004/108/EC: EN 61000-6-1; EN 61000-6-3 33579 GR-18 receiver Graupner/SJ declares that the product is conform to EU norms. -
Page 11: Spare Parts
LED light panel, white More interesting, current accessories, such as FPV goggles, transmitter, cameras, propellers, batteries, motors and speed controllers for your Race Copter see Accessories for the respec- tive items on our website in the online shop: www.graupner. de 16520_Copter_jh_V1... -
Page 12: Notes On Environmental Protection
The present construction or user manual is for informational purposes only and may be changed without prior notice. The current version can be found on the Internet at www.graupner.de on the relevant product page. In addition, the company Graupner/SJ GmbH has no responsibility or liability for any errors or inaccuracies that may appear in construction or operation manuals.
Need help?
Do you have a question about the Race copter alpha 250 Q and is the answer not in the manual?
Questions and answers