Download Print this page

Advertisement

Quick Links

Assembly Instructions for the ALTONA model boat, Order No.: 2146, Id. No.: 58434
The "ALTONA" is a semi-scale model of a steam launch.
All the parts which are difficult to make, such as hull, stern, rudder, deck, superstructure, toplight and
funnel are supplied in the form of extremely high-quality GRP mouldings.
The Fittings Set includes many metal and injection-moulded plastic parts which make it much easier and
faster to complete the model.
Two possible variants can be built: for electric power or for steam engine.
The model is not suitable for the beginner to modelling, as it calls for a certain minimum level of manual
modelling skill.
For the steam-powered version some experience in handling steam engines is advisable.
Auxiliary working systems, such as lighting, steam whistle etc., can be installed; details are left to the
builder's discretion.
Specification:
Overall length approx.
Beam approx.
Overall height approx.
Total displacement max.
Scale
Important Safety Notes
You have acquired a kit which can be assembled into a fully working RC model when fitted out with
suitable accessories. However, we as manufacturers have no control over the way you build and operate
your RC model boat, nor how you install, operate and maintain the associated components, and for this
reason we are obliged to deny all liability for loss, damage or costs which are incurred due to the
incompetent or incorrect use and operation of our products, or which are connected with such operation in
any way. Unless otherwise prescribed by binding law, the obligation of the GRAUPNER company to pay
compensation, regardless of the legal argument employed, is excluded. This includes personal injury,
death, damage to buildings, damage due to loss of business or turnover, interruption of business or other
direct or indirect consequent damage whose root cause was the operation of the model. The total liability
in all cases and under all circumstances is limited to the amount of money which you actually paid for this
model.
This model boat is built and operated at the sole and express responsibility of the operator. The
only way to avoid injury to persons and damage to property is to handle and operate the model
with the greatest care and consideration at all times.
Before you run the model for the first time please check that your private third-party insurance covers the
operation of model boats of this kind. If in doubt, take out a special insurance policy designed to cover
modelling risks.
These Safety Notes should be kept in a safe place. If you ever dispose of the model, be sure to pass them
on to the new owner.
Guarantee conditions
The guarantee covers replacement of any parts which can be shown to exhibit manufacturing faults or
material defects within the guarantee period of 24 months from the initial date of purchase. No other
claims will be considered. Cost of transport, packing and freight are payable by the purchaser. We accept
no liability for damage in transit. When you send the product to GRAUPNER, or to the approved Service
Centre for your country, you must include a clear and concise description of the fault together with the
invoice showing the date of purchase. The guarantee is invalid if the component or model fails due to an
accident, incompetent handling or incorrect usage.
The following points are important and must be observed at all times:
This model is not suitable for young persons under 14 years of age.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!
1315 mm
305 mm
500 mm
17 kg
1 : 20
11
11/2007

Advertisement

loading

Summary of Contents for GRAUPNER ALTONA

  • Page 1 Cost of transport, packing and freight are payable by the purchaser. We accept no liability for damage in transit. When you send the product to GRAUPNER, or to the approved Service Centre for your country, you must include a clear and concise description of the fault together with the invoice showing the date of purchase.
  • Page 2 Clean the model carefully after every run, and remove any water which penetrates the hull. If water • gets into the RC components, dry them out carefully and send them to your nearest GRAUPNER Service Centre for checking. Clean the model and transmitter using suitable cleaning agents only. Ask your model shop owner if •...
  • Page 3 48a. Satisfy yourself that all these parts line up correctly before gluing the stern tube and the stern bulkhead to the hull permanently. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 11/2007...
  • Page 4 Neither solution is exactly easy or pleasant work, but the result is worth it, because the finished wheelhouse looks very impressive. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 11/2007...
  • Page 5 The flag, part 97, is a ready-made item, and should be attached to the flagstock using a lanyard, part 98, and two rings, parts 96, as this system allows the flag to be run up or down at will. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!
  • Page 6 We suggest that you ask your local model shop or a specialist paint supplier for recommended paint types. As a basic rule we only recommend the Graupner colour paint series, as we know that they have been tested on a very wide variety of base surfaces.
  • Page 7 Ready made Anchor winch Plastic Ready made Anchor Metal Ready made Anchor chain Metal 250 mm Tyre fender, two-part Vac.-moulded Cleat Plastic Ready made GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 11/2007...
  • Page 8 2 x 3 x 180 mm overall Window frame Mahogany 1 x 5 x 160 mm overall Door frame Mahogany 2 x 3 x 300 mm overall GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 11/2007...
  • Page 9 1 speed controller, NAVY V40R, Order No. 2875 4 retaining screws, 2.9 Ø x 13, Order No. 746.13 4 washers, 2.8 / 7 Ø, Order No. 560.8 GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 11/2007...
  • Page 10 Drive battery 12 V / 10 Ah Gas tank Gasregulator valve Steam boiler Steam engine Exhaust gas condenser Top view Bow view Stern view Assembly GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 11/2007...

This manual is also suitable for:

214658434