Safety Procedures - Rotabroach RD07A Manual

Issue 8
[2]

SAFETY PROCEDURES

READ BEFORE USING THE MACHINE
• ALWAYS WEAR SAFETY GOGGLES AND EAR DEFENDERS WHEN OPERATING THE
MACHINE.
Ensure motor is switched off when changing cutters, working on the machine, or
•
clearing swarf.
• Always ensure cutter-retaining screws are secure.
• Regularly clear the work area and machine of swarf and dirt.
• Read section [5] page 5 before attempting to fuel the machine.
• Remove tie, rings, watches and loose adornments, which might entangle with the
rotating machinery.
• Should the cutter become fast in the work piece, switch off the motor immediately to
prevent personal injury and turn the arbor to and fro. Do not attempt to free the cutter
by starting and stopping the motor.
• If the machine is accidentally dropped, always thoroughly examine the machine for signs
of damage and check that it functions correctly before trying to drill a hole.
• Regularly inspect the machine and check that nuts and screws are tight.
[3] ROTABROACH CUTTING FLUID
• Rotabroach cutting fluid has been specifically formulated to significantly enhance the
performance and life of the cutting tool, and improve the quality and surface finish of
the hole.
• Rotabroach cutting fluid is available in 1 litre (RD208) and 5 litre (RD229) bottles.
[4] COOLANT INDUCEMENT
• Constituent items:
Coolant bottle and hose assembly RY2307
5
June 2014