Technicolor MediaConnect TG234 Setup And User Manual page 52

Cannot connect via WPS
If you have trouble connecting your wireless client via WPS, try one of the following:
The WPS session only lasts 2 minutes, make sure to press the WPS button on both devices within this time slot.

Move the devices closer to each other.

Wait until the WPS LEDs of the TG234 and other devices are off and then try again.

Configure manually.

For more information, see
DMS3-CTC-25-221 v1.0
"4.3 Connecting manually without WPS" on page 42.
5 Support
49