Wireless Settings Configuration Page - Technicolor MediaConnect TG234 Setup And User Manual

3.1.3 Wireless settings configuration page

Introduction
The CONFIG - WIRELESS page, which allows you to configure the wireless settings of your TG234, consists of two
categories:
The Basic settings

The Advanced settings

Navigation
On the Config menu, click Wireless to navigate to the CONFIG - WIRELESS page.
Click Basic or Advanced on the tab to switch between categories.
The Basic settings
The Basic category allows you to configure some basic settings of your wireless connections:
Device Mode:

The mode you set according to the user scenarios.
Device Mode displays the mode in which the TG234 is currently working.
To change the device mode, use the mode switch on the back of your TG234. For more information, see
"1.2.4 Mode switch" on page
If your TG234 is in Repeater mode, this will also be displayed as Access Point. If you want to check if the TG234
is in repeater mode, check the Link Quality and Access Point LED on the TG234's front panel. If they are both on,
then your TG234 is in repeater mode.
Repeater:

Allows you to force the TG234 in repeater mode. If the Repeater box is:
 Selected then the TG234 will be in repeater mode.
DMS3-CTC-25-221 v1.0
9.
3 Configuration tools
23