Technicolor MediaConnect TG234 Setup And User Manual page 35

Table of Contents

Advertisement

2 On the home page, you can see TG234-AP-XXXXXX in the Ethernet list:
Click TG234-AP.
3 The following page shows you an overview of the TG234 wireless settings. On the upper-right corner, click Configure in
the navigation bar to configure the wireless settings:
Troubleshooting
If the wireless settings were not configurable, or if you don't see the wireless settings on this page, make sure that:
The mode switch on the back panel of the TG234 is set to Access Point.
Your computer, Technicolor MediaAccess Gateway, and the TG234 are correctly connected.
Then return to step 2 of the procedure to try again.
If it is still not configurable, it's probably that your gateway does not support this feature. Instead, you can use TG234 GUI
for configuration. For more information, see
DMS3-CTC-25-221 v1.0
"3.1 Configure the TG234 via its GUI" on page
3 Configuration tools
19.
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents