Technicolor MediaConnect TG234 Setup And User Manual page 41

Troubleshooting
If you are having trouble connecting your devices via WPS, this may be caused by one of the following reasons:
WPS can not be correctly executed:

Configure your wireless manually. For more information, see
Your devices are out of range:

If possible move your devices closer to each other or use a wireless repeater to extend the range of your wireless network.
Another device is interfering on the selected wireless channel:

Change the wireless channel of your TG234.
The wireless channel can be changed by simply restart your TG234.
You can also change the wireless channel on GUI. For more information, see
page 48.
DMS3-CTC-25-221 v1.0
4 The TG234 wireless access point
"4.3 Connecting manually without WPS" on page
"Change the wireless channel" on
42.
38