Maintenance; Maintenance Plan; Maintenance Work; Replacing The Waste Bag - Nilfisk-Advance IVB 3-M Operating Instructions Manual

IVB 3-M
IVB 5-M
IVB 7-M
english

7 Maintenance

7.1

Maintenance plan

7.2.1 Replacing the waste bag

7.2.2 Replacing the filter bag
7.2.3 Emptying dirt tank (IVB 3-M/5-M)
7.2.4 Emptying the dirt tank (IVB 7-M)
7.2.5 Replacing filter element
(IVB 3-M)
7.2.6 Replacing filter element
(IVB 5-M/7-M)
7.2

Maintenance work

7.2.1 Replacing the waste
bag
When using IVB 3-M/5-M/7-M clean
them thoroughly before replacing
the waste bag - see sections 4.5
bzw.4.6.
During the following work, ensu-
re that dust is not unnecessarily
spread around. Wear a P2 brea-
thing mask.
2 2
1 1
10
1 1
3
After finishing work


IVB 3-M/5-M:
1
1. Open the retaining clamps and
2. Carefully remove the waste bag
2
3. Close the waste bag connection
4. Close the waste bag using the
5. Dispose of the dirt in accordance
6. Insert a new filter bag into the
3
IVB 7-M:
1. Remove the upper section of
2. Open the retaining clamps (1)
3. Carefully remove the waste bag
4. Close the waste bag using the
5. Dispose of the dirt in accordance
6. Insert a new filter bag into the
As required




remove the upper section of the
cleaner from the dirt tank.
connection (1) from the inlet fit-
ting.
with the slide (2).
cable binder (3).
with legal regulations.
cleaned tank as described in the
instructions enclosed.
IMPORTANT: Press the filter bag
connection firmly on to the inlet
fitting.
cleaner from the dirt tank.
and remove the intermediate ring
(2) from the tank.
connection from the inlet fitting.
cable binder (3).
with legal regulations.
cleaned tank as described in the
instructions enclosed.
IMPORTANT: Press the filter bag
connection firmly on to the inlet
fitting.
1) Option depending on model