Electrical Connection; Hazardous Materials; Service And Maintenance - Nilfisk-Advance GM 80 Instructions For Use Manual

Electrical connection

• Turn off the machine and unplug before starting dust bag or fi lter
change. Grasp the plug, not by pulling the cord.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifi ed persons in
order to avoid hazard.
• Do not handle the machine with wet hands.
• Turn off the machine before unplugging. To unplug, grasp the
plug, not by pulling the cord.
• Do not carry or pull the machine by the cord.
• The machine must not be used if the cord shows any sign of
damage. Regularly inspect the cord for damage, in particular if
it has been crushed, shut in a door or run over.

Hazardous materials

Vacuuming up hazardous materials can lead to serious or even
fatal injuries.
The following materials must not be picked up by the vacuum cleaner:
• Hazardous dust
• Hot materials (burning cigarettes, hot ash, etc.)
• Flammable, explosive, aggressive liquids (e.g. petrol, sol-
vents, acids, alkalis, etc.)
• Flammable, explosive dust (e.g. magnesium or aluminum
dust, etc.)

Service and maintenance

• Store the machine indoors and in a dry environment.
• Change the pre-fi lter with every fourth dust bag.
• Clean the machine surface with a dry cloth or a damp cloth with a little cleaning agent
• Order original accessories from a local dealer.
• For service, contact your local dealer.
Responsibility
Nilfi sk disclaims all responsibility for all damage caused by incorrect use or modifi cation
of the machine. Please refer to our website at www.nilfi sk.com for further instructions and
information on use.
8
WARNING
WARNING
Original instructions